Prothonotary Warbler Nesting Box
Bird Houses & Nesting Box Woodworking Plan - Prothonotary Warblers
Prothonotary Warbler use the below nest box.
Suitable Nestbox Size: ~ 6 inches tall. No perches at the entrance holes as they would aid predators.
Floor Dimensions: at least 5″ x 5″ .
Material to be used: Red Cedar (more durable than other wood material), rough cut boards or exterior-grade plywood at least 1/2″ thick. Unpainted. Ventilation openings in the floor and under the roof. Although some experts disagree with the notion that ventilation openings are needed at all. Please refer to this article for further information. This may also depend on location of nest box, exposure to direct sun as well as material used to build the nest box.
Entrance Hole: About 1.2″ in diameter to keep the larger birds out, about 4 inches above the floor.
Roof: Hinged, secured with shutter hooks. Sloped down, overlapping on the sides and the front reduces exposure to rain and makes it more difficult for predators to get to the chicks or eggs.
Hardware: Best to use corrosion resistant, stainless steel and dichromate plated screws
Predator Guard: An inverted metal cone attached below the nextbox will provide some protection against predators.
Position:
On poles, trees or attached to buildings about 5 – 7 feet off the ground.
Position nest far enough from roads, paths or trails to minimize disturbance.
